When the hydraulic lifting platform is used, what needs to be done is to carry out the relevant platform maintenance. How to carry out the specific maintenance? Now let's follow Xiao Bian's steps to solve it.

液壓升降平臺怎么進行維護呢？

How to maintain the hydraulic lifting platform?

一：更加潤滑

1： More lubrication

大多數人以為增加更多潤滑劑不會對設備造成傷害。不是這種情況。液壓式升降平臺的機械操作部件的結構和運用決定了燃料量。一般，設備的運用說明書中有清晰的規則和要求。應根據設備說明書，燃油表或燃油表，窗戶等補充。增加過多潤滑劑對機械設備不利。

Most people think that adding more lubricant will not harm the equipment. This is not the case. The structure and application of the mechanical operating parts of the hydraulic lifting platform determine the fuel quantity. Generally, there are clear rules and requirements in the equipment operation instructions. It shall be supplemented according to the equipment specification, fuel gauge or fuel gauge, windows, etc. Adding too much lubricant is bad for mechanical equipment.

二：加入潤滑油后，快速

2： After adding lubricating oil, quickly

嚴格來說：這是概念了解中的過錯，只有燃料可以直接參與作業。

Strictly speaking, this is the fault in concept understanding, and only fuel can directly participate in the operation.

液壓式升降平臺潤滑油首要用于向彼此移動的沖突副增加潤滑油以填充不平坦部分，并堅持相應厚度的潤滑油膜，這可以使沖突副的外表彼此別離。

The lubricating oil of the hydraulic lifting platform is mainly used to add lubricating oil to the conflicting pairs moving with each other to fill the uneven part, and adhere to the lubricating oil film of corresponding thickness, which can make the appearance of the conflicting pairs separate from each other.

削減沖突，削減磨損，并答應冷卻和密封。

Reduce conflict, reduce wear, and allow cooling and sealing.

三、替換密封圈時

3、 When replacing the seal ring

替換密封圈時，首要需求打開液壓式升降平臺的液壓體系，嚴厲清潔，避免雜質和臟油進入體系。

When replacing the seal ring, it is necessary to open the hydraulic system of the hydraulic lifting platform and clean it strictly to avoid impurities and dirty oil entering the system.

安裝時，您需求運用特別東西來避免鋒利的邊緣和指甲被劃傷，直接從部件的螺紋部分移除密封環更加困難。

During installation, you need to use special things to prevent sharp edges and nails from being scratched. It is more difficult to remove the seal ring directly from the threaded part of the component.

在特別情況下，有必要制作一個簡單的安裝東西或運用塑料薄膜包裹螺紋方位。密封圈類型好，可直接運用。

In special cases, it is necessary to make a simple installation or wrap the thread orientation with plastic film. The seal ring is of good type and can be used directly.